QNix® 9500 Basic Coating Thickness Gauge with integral probe Fe 120 mils

Dry Film Thickness Gauge | Coating thickness gauge | Paint thickness meter QNix® 9500 Basic ext. cable, QN-9 software Fe/Nfe 120 mils

ISO 2178, ASTM D7091, price coating thickness tester price, Non-Fe paint thickness tester, Mil paint thickness gauge, modular paint gauge, coating thickness tester, meter paint, Non-Ferrous dry film thickness gauge, mil thickness meter gauge Fe, mil gauge

Dry Film Thickness Gauge | Coating thickness gauge | Paint thickness meter QNix® 9500 Basic -ext. cable, QN-9 software Fe/Nfe 200/200 mils

Dry Film Thickness Gauge | Coating thickness gauge | Paint thickness meter QNix® 9500 Basic Paint Thickness Gauge -ext. cable, probe holder-QN-9 software Fe/Nfe 200/120 mils

The QNix® 9500 Basic modular system Coating Thickness Gauge Fe/Nfe 200/120 mils series of Coating Thickness Gauges is a rugged – IP protection IP64 and electronic digital Paint & Coating thickness gauge designed for fast (more than 120 readings per minute), accurate, reliable and repeatable dry Film thickness measurements on both ferrous and non-ferrous metals and Dual probes on all relevant substrates: ISO/FE, NF/FE, ISO/NF. QNix® 9500 is ideal for single-handed operations and uses the proven Hall sensor technology (ISO 2178, ASTM D7091) to measure non-conductive, non-magnetic coating thickness on magnetic substrates such as steel, chrome, copper, zinc. The Eddy current principle (ISO 2360, ASTM D7091) is used to measure non-conductive coating thickness on non-ferrous metals substrates. With its ability to interchange probes and statistically (graphic) display, the QNix® 9500 Basic modular system Coating Thickness Gauge Fe/Nfe 200/120 mils covers almost all features of a more advanced Paint Thickness Gauge. Available probes for the QNix® 9500 Coating Thickness Gauge, which are either integrated or interchangeable with cable, are built with stainless and enclosed by a protective membrane IP65 for dust resistant (weatherproof). It has a polished ruby tip that is extremely wear-resistant. The QNix® 9500 Basic modular system Coating Thickness Gauge Fe/Nfe 200/120 mils come fully calibrated and is equipped with easily adjustable features for measuring on rough and curved surfaces. Its low center of gravity and extremely large contact surface ensures correct placement, better handling, and precise measuring results. It comes with a Certificate of Calibration traceable to a national metrology institute NIST or PTB.
$1,465.00
Availability: In stock
SKU
T1454025
Automation Dr. Nix QNix® 9500 Basic modular system Coating Thickness Gauge Dual-Fe/Nfe 200/120 mils is a rugged – IP protection IP64 and electronic digital Paint & Coating thickness gauge designed for fast (more than 120 readings per minute), accurate, reliable and repeatable dry Film thickness measurements on both ferrous and non-ferrous metals and Dual probes on all relevant substrates: ISO/FE, NF/FE, ISO/NF. QNix® 9500 is ideal for single-handed operations and uses the proven Hall sensor technology (ISO 2178, ASTM D7091) to measure non-conductive, non-magnetic coating thickness on magnetic substrates such as steel, chrome, copper, zinc. Eddy current principle (ISO 2360, ASTM D7091) is used to measure non-conductive coating thickness on non-ferrous metals substrates. With its ability to interchange probes and statistically (graphic) display, the Automation Dr. Nix QNix® 9500 Basic modular system Coating Thickness Gauge Fe/Nfe 200/120 mils covers almost all features of a more advanced Paint Thickness Gauge. Available probes for the QNix® 9500 Coating Thickness Gauge, which are either integrated or interchangeable with cable, are built with stainless and enclosed by a protective membrane IP65 for dust resistant (weatherproof). It has a polished ruby tip that is extremely wear-resistant. The QNix® 9500 Basic modular system Coating Thickness Gauge Dual-Fe/Nfe 200/120 mils come fully calibrated and is equipped with easily adjustable features for measuring on rough and curved surfaces. Its low center of gravity and extremely large contact surface ensures correct placement, better handling, and precise measuring results. It comes with a Certificate of Calibration traceable to a national metrology institute NIST or PTB.
More Information
Country of Manufacture Germany
Write Your Own Review
You're reviewing:Dry Film Thickness Gauge | Coating thickness gauge | Paint thickness meter QNix® 9500 Basic Paint Thickness Gauge -ext. cable, probe holder-QN-9 software Fe/Nfe 200/120 mils
Your Rating