QNix® 5500 Series Digital Paint Thickness Gauges |120+ Readings per Minute

QNix® 5500 series of Digital Paint Thickness Gauges

Powder Mil paint coating thickness Gauge meter measurement: Integral and exchangeable Ferrous, Non - Ferrous, Dual (Fe / NFe) Probes- available with Cable

Conforms to DIN EN ISO 2808, DIN 50981, DIN 50984, ISO 2178, BS 5411 (3 & 11), BS 3900-C5, ASTM B 499, ISO 2360, ASTM D 1400, ASTM D 1186, ASTM D 7091

Fields of Application

Powder Coatings, Automotive, commercial & industrial product finishing, medical equipment, shipbuilding, infrastructure, offshore, production line testing/simply quality control checks out in the field, etc

Measuring in tough environments without compromising the quality of QNix® Paint thickness Gauges

• Ready to measure - No adjustment required for most applications

• One icon Operation menu 

• Rolling statistics on display with flipping measuring presentation view at 0°, 90°, 180°, 270°. • Mils/microns switchable

• Very Fast, repeatable measurements - 120+ readings per minute • An onscreen running average of measured readings

• Protective Type IP 65 - wear-resistant, ruby-tipped probe

• V-groove in the probe holder for positioning on curved parts

• Auto-rotating and adjustable brightness of the display

• Certificate of Calibration showing traceability to PTB (equivalent to NIST in the US)

The trueness of Measurements:

  • Accuracy of measurement on Ferrous substrates related to QNix® reference standards: (1 μm + 2 % of the reading) to 2,0 mm; 3 % of the reading from 2,0 mm
  • Accuracy of measurement on Non- Ferrous substrates related to QNix® reference standards: (2 μm + 2 % of the reading) to 2,0 mm;  3 % of the reading from 2,0 mm. 

Measuring Ranges of available Probes

Measuring ranges  

Switching Unit of Measurement: Mil to micron

To switch from Mils to microns or vice versa is easy. Open the battery compartment by turning the lock behind the QNix paint gauge anticlockwise, where you find a switch – up for mils, down for micron. If you are using the QNix paint gauge for the first time, switch to the desired unit of measurement and then insert the batteries, then lock the device. If you have been using the Qnix Paint gauge and need to switch to a different unit of measurement, follow the same procedure. Take out the batteries, switch to the desired unit, reinsert the batteries, and turn on your device.  The current unit of measurement is displayed on the upper right side above the current reading. Remember that 001″ = one-thousandth of an inch or 1.0 mil (1 mil, thou) and 1 mil, thou= 25.4 µm.

 

Delivery scope of the QNix® 5500 Paint Thickness Gauge integrated model 

  •  Handheld QNix® 5500 Paint Thickness gauge body with integral probe
  •  Ferrous- and Non-Ferrous reference plate and two test foils
  •  Test certificate
  •  Operation manual
  •  2 Mignon batteries 1,5 V (AA) alkaline
  •  Plastic case for transport and storage

 

Delivery scope of the QNix® 5500 Paint Thickness Gauge with a cable model

  •  Handheld QNix® 5500 Paint Thickness gauge body
  •  Fe- and Non-Ferrous reference plate and two test foils
  •  Operation manual
  •  Probe holder
  •  Probe cable
  •  2 Mignon batteries 1,5 V (AA) alkaline
  •  Plastic case for transport and storage

****** If a probe is ordered with the modular system, the scope of delivery is extended by Probe and Test certificate for measuring probe

 

 

 

 

Set Descending Direction
View as Grid List

16 items

Page
per page
Set Descending Direction
View as Grid List

16 items

Page
per page